Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Plug in resistorDescription: Potentiometer 16mm 100K ROTARY 3B TAPER21491+$81.072710+$77.5478100+$76.9133250+$76.4198500+$75.64441000+$75.29192500+$74.79845000+$74.3754 -
![]()
Category: Plug in resistorDescription: TE CONNECTIVITY / CGS MPC52201J Through hole resistor, MPC series, 200 ohm, 5 W, ± 5%, 300 V, radial lead50975+$14.570050+$13.9474200+$13.5987500+$13.51151000+$13.42432500+$13.32475000+$13.26247500+$13.2002 -
![]()
Category: Plug in resistorDescription: Thick film resistor - through-hole MPC7 200R 5%69955+$25.098850+$24.0262200+$23.4256500+$23.27541000+$23.12532500+$22.95365000+$22.84647500+$22.7391 -
![]()
Category: Plug in resistorDescription: TE CONNECTIVITY / CGS MPC52103J Through hole resistor, MPC series, 10 kohm, 5 W, ± 5%, 300 V, TO-22032535+$15.368050+$14.7112200+$14.3434500+$14.25151000+$14.15952500+$14.05455000+$13.98887500+$13.9231 -
![]()
Category: Plug in resistorDescription: TE CONNECTIVITY / CGS MPC52203J Through hole resistor, MPC series, 20 kohm, 5 W, ± 5%, 300 V, radial lead88905+$5.946825+$5.506350+$5.1979100+$5.0658500+$4.97772500+$4.86755000+$4.823510000+$4.7574 -
![]()
Category: Plug in resistorDescription: TE CONNECTIVITY / CGS MPC52202J Through hole resistor, MPC series, 2 kohm, 5 W, ± 5%, 300 V, radial lead15885+$4.320025+$4.000050+$3.7760100+$3.6800500+$3.61602500+$3.53605000+$3.504010000+$3.4560 -
![]()
Category: Plug in resistorDescription: TE CONNECTIVITY / CGS MPC108103J Through hole resistor, MPC series, 10 kohm, 10 W, ± 5%, 300 V, radial lead916010+$9.2748100+$8.8111500+$8.50191000+$8.48642000+$8.42465000+$8.34737500+$8.285510000+$8.2546 -
![]()
Category: Plug in resistorDescription: TE CONNECTIVITY / CGS MPC108102J Through hole resistor, MPC series, 1 kohm, 10 W, ± 5%, 300 V, radial lead979010+$9.2052100+$8.7449500+$8.43811000+$8.42282000+$8.36145000+$8.28477500+$8.223310000+$8.1926 -
![]()
Category: Plug in resistorDescription: TE CONNECTIVITY / CGS MPC1085R0J Through hole resistor, MPC series, 5 ohm, 10 W, ± 5%, 300 V, radial lead290210+$7.5324100+$7.1558500+$6.90471000+$6.89212000+$6.84195000+$6.77927500+$6.728910000+$6.7038 -
![]()
Category: Plug in resistorDescription: Res POT 50KΩ 20% (35 X 27mm) Pin Thru-Hole92665+$3.815125+$3.532550+$3.3347100+$3.2499500+$3.19342500+$3.12275000+$3.094510000+$3.0521 -
![]()
Category: Plug in resistorDescription: RS20H11AA02T pallet22275+$5.968425+$5.526350+$5.2168100+$5.0842500+$4.99572500+$4.88525000+$4.841010000+$4.7747 -
![]()
Category: Plug in resistorDescription: RS30112AC00J packaged236110+$6.6072100+$6.2768500+$6.05661000+$6.04562000+$6.00155000+$5.94657500+$5.902410000+$5.8804 -
![]()
Category: Plug in resistorDescription: Wire wound resistor - through-hole ER17 24R 5% LOOSE39925+$5.089525+$4.712550+$4.4486100+$4.3355500+$4.26012500+$4.16595000+$4.128210000+$4.0716 -
![]()
Category: Plug in resistorDescription: Wire wound resistor - through-hole ER17 3R3 5% LOOSE60865+$5.325825+$4.931350+$4.6551100+$4.5368500+$4.45792500+$4.35925000+$4.319810000+$4.2606 -
![]()
Category: Plug in resistorDescription: 10Ω ±5% 14W 0/+60ppm/℃ Φ8.00mm79845+$5.128725+$4.748850+$4.4828100+$4.3689500+$4.29292500+$4.19795000+$4.159910000+$4.1029 -
![]()
Category: Plug in resistorDescription: Res Wirewound 680Ω 5% 11W 0ppm/°C to 60ppm/℃ Conformal AXL Thru-Hole Tray38795+$3.701725+$3.427550+$3.2356100+$3.1533500+$3.09852500+$3.02995000+$3.002510000+$2.9614 -
![]()
Category: Plug in resistorDescription: Res Wirewound 22KΩ 5% 14W 0ppm/°C to 60ppm/℃ Conformal AXL Thru-Hole Tray452610+$6.8256100+$6.4843500+$6.25681000+$6.24542000+$6.19995000+$6.14307500+$6.097510000+$6.0748 -
![]()
Category: Plug in resistorDescription: Res Wirewound 27Ω 5% 14W 0ppm/°C to 60ppm/℃ Conformal AXL Thru-Hole Tray13675+$5.089525+$4.712550+$4.4486100+$4.3355500+$4.26012500+$4.16595000+$4.128210000+$4.0716 -
![]()
Category: Plug in resistorDescription: C14 Series 14W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size in harsh environmental conditions. Power at 40 ° C | 14W --- Resistance Tolerance | 5% Temperature Coefficient |>1 Ω 90ppm/° C Operating Temperature | -55 → 200 ° C C Limiting Element Voltage | 650V Body Length | 53.3 mm Body Diameter | 8.5 mm Lead Length | 35 mm Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.25795+$4.036525+$3.737550+$3.5282100+$3.4385500+$3.37872500+$3.30405000+$3.274110000+$3.2292 -
![]()
Category: Plug in resistorDescription: C14 Series 14W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size in harsh environmental conditions. Power at 40 ° C | 14W --- Resistance Tolerance | 5% Temperature Coefficient |>1 Ω 90ppm/° C Operating Temperature | -55 → 200 ° C C Limiting Element Voltage | 650V Body Length | 53.3 mm Body Diameter | 8.5 mm Lead Length | 35 mm Lead Diameter | 0.8 mm10575+$20.511350+$19.6347200+$19.1439500+$19.02111000+$18.89842500+$18.75825000+$18.67057500+$18.5829 -
![]()
Category: Plug in resistorDescription: C14 Series 14W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size in harsh environmental conditions. Power at 40 ° C | 14W --- Resistance Tolerance | 5% Temperature Coefficient |>1 Ω 90ppm/° C Operating Temperature | -55 → 200 ° C C Limiting Element Voltage | 650V Body Length | 53.3 mm Body Diameter | 8.5 mm Lead Length | 35 mm Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.63115+$5.355525+$4.958850+$4.6811100+$4.5621500+$4.48272500+$4.38355000+$4.343910000+$4.2844 -
![]()
Category: Plug in resistorDescription: C14 Series 14W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size in harsh environmental conditions. Power at 40 ° C | 14W --- Resistance Tolerance | 5% Temperature Coefficient |>1 Ω 90ppm/° C Operating Temperature | -55 → 200 ° C C Limiting Element Voltage | 650V Body Length | 53.3 mm Body Diameter | 8.5 mm Lead Length | 35 mm Lead Diameter | 0.8 mm ### Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.73565+$25.621850+$24.5269200+$23.9137500+$23.76041000+$23.60712500+$23.43195000+$23.32247500+$23.2129 -
![]()
Category: Plug in resistorDescription: C10 Series 10W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size under harsh environmental conditions | 10W --- | Resistance tolerance | ± 5% temperature coefficient | ± 90ppm/° C operating temperature | \ -55 ° C →+200 ° C Extreme element voltage | 500V main body length | 38.1 mm main body diameter | 8.5 mm lead length | 35 mm lead diameter | 0.8 mm # # # Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.46315+$13.403550+$12.8307200+$12.5100500+$12.42981000+$12.34962500+$12.25795000+$12.20067500+$12.1434 -
![]()
Category: Plug in resistorDescription: C10 Series 10W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size under harsh environmental conditions | 10W --- | Resistance tolerance | ± 5% temperature coefficient | ± 90ppm/° C operating temperature | \ -55 ° C →+200 ° C Extreme element voltage | 500V main body length | 38.1 mm main body diameter | 8.5 mm lead length | 35 mm lead diameter | 0.8 mm # # # Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.459410+$7.8324100+$7.4408500+$7.17971000+$7.16662000+$7.11445000+$7.04927500+$6.996910000+$6.9708 -
![]()
Category: Plug in resistorDescription: C10 Series 10W, axial Tyco C series affordable resistors can consume high power at 40 ° C through relatively small size under harsh environmental conditions | 10W --- | Resistance tolerance | ± 5% temperature coefficient | ± 90ppm/° C operating temperature | \ -55 ° C →+200 ° C Extreme element voltage | 500V main body length | 38.1 mm main body diameter | 8.5 mm lead length | 35 mm lead diameter | 0.8 mm # # # Enamel axial and radial -2.5 to 50W small high-power resistor series, suitable for harsh environments. Their high stability and reliability make them particularly suitable for protecting circuits. The resistance wire element is wound on a high-purity ceramic substrate and uses a fully welded top cover and lead structure to provide considerable strength and damage resistance. The enamel protective coating has a resistance to all normal cleaning solvents for printed circuit boards. Application instructions. The distance between the bending point of the output end and the shell should not be less than 1.5mm. It is recommended that the minimum bending radius be 1mm. In order to achieve full load rated power consumption, the distance between the end welding and the main body should not be less than 4mm. When cool, enamel has excellent insulation resistance; But as the temperature rises, the resistance coefficient will decrease. Therefore, if a resistor operates at or near maximum temperature, it cannot be classified as an insulation resistance and should not come into contact with any conductive material.45445+$14.520950+$13.9003200+$13.5528500+$13.46591000+$13.37912500+$13.27985000+$13.21777500+$13.1557 -
![]()
Category: Plug in resistorDescription: ARCOL/OHMITE AP851 1R F Through Hole Resistor, High Power, 1Ω, 420V, TO-220, 50W, ± 1%, AP851 Series97925+$24.674150+$23.6197200+$23.0292500+$22.88161000+$22.73392500+$22.56525000+$22.45987500+$22.3543 -
![]()
Category: Plug in resistorDescription: Thick film resistor 10k Ω± 5% 35W19885+$21.825250+$20.8925200+$20.3702500+$20.23961000+$20.10902500+$19.95985000+$19.86657500+$19.7732 -
![]()
Category: Plug in resistorDescription: HB Series high voltage, metal ceramic film high reliability, low value, low noise, flame-retardant epoxy coating resistance tolerance | ± 1% -------- | Temperature coefficient | ± 100ppm/° C Operating temperature | 0 ° C →+125 ° C Insulation resistance | 106M Ω# # # Radial/surface installation at 500V DC69831+$109.665210+$104.8971100+$104.0389250+$103.3713500+$102.32241000+$101.84552500+$101.17805000+$100.6059 -
![]()
Category: Plug in resistorDescription: Res Thick Film 500Ω 5% 10W ±100ppm/℃ Molded TO-220 RDL Thru-Hole Tray61355+$17.225950+$16.4898200+$16.0775500+$15.97451000+$15.87142500+$15.75365000+$15.68007500+$15.6064 -
![]()
Category: Plug in resistorDescription: Thick film resistor 4.7 Ω± 5% 100W41461+$46.119710+$43.4735100+$41.5077250+$41.2053500+$40.90281000+$40.56262500+$40.26025000+$40.0712
